#Fuzhou rockchip driver how to
#Fuzhou rockchip driver install
#Fuzhou rockchip driver driver
#Fuzhou rockchip driver upgrade
#Fuzhou rockchip driver android

The initial RE work of the Rockchip bootloader updating protocol is by naobsd and has been improved by some in rkflashtool.

#Fuzhou rockchip driver android

Rockchip has provided tools for upgrading within Linux (closed source) since Android 4.4.

Follow this unbrick instructions to unbrick it.

#Fuzhou rockchip driver upgrade

This happens at upgrading bootloader, if you need to upgrade the bootloader or the update.img contains a new bootloader, you probably will meet this.

you can flash one of more image at one time as needed.

The kernel is contained within the boot.img when you package the image by './mkimage.sh ota' please see Android Build for more information.

If successful the board will disconnect from the tool and boot into the system. Finally Click 'Run' to flash images to the device (the right most selection shows the log of the progress). You can then select one or more files and flash them at once. After you must click the column on the right side for the path of the file you want to flash. There are eight selections to choose from so select the correct row and then select the checkbox to the left of the row to select it. Power down the MarsBoard and connect the MarsBoard to the computer and let the board go to recovery mode then the program will detect it. Unzip it the file and double click AndroidTool.exe. Using AndroidTool to falsh image by partitionДownload AndroidTool from here. If the flashing has aborted ,it could possibly be an error with the update.img, you can either try to redo the operations above or make the update.img again! Power down the MarsBoard and connect the MarsBoard to the computer then let the board go to recovery mode after the program should detect the device.Д¬lick the 'Upgrade' button to begin flashing and when the flashing process finishes successfully you will see the following interface.

#Fuzhou rockchip driver how to

For information on how to make an update.img see update.img Select an image (RK3066 update.img), click Firmware. Then unzip it and double click AndroidTool.exe Using AndroidTool to flash update.img (Firmware)Дownload AndroidTool from here.

use upgrading firmware (flash update.img only, it will erase everything.).

use Download Image (can flash by partitions).

There are two methods to flash an image use android tools.

#Fuzhou rockchip driver driver

Now the driver is installed successfully. When the driver is installed successful you will then see a Rockusb Device in the device manager window. Select 'Browse the computer for driver software'.ДЇind the file unzipped file you downloaded earlier (Rockusb_Driver_v3.7.rar) and select either the 32/64bit folder then click 'OK' to install. Select the Unknown device then right click and select 'Update Driver Software'. After your computer should detect the board and you will see an unknown device within device manager. Now the driver should have been installed successfully!Дownload the file (Rockusb_Driver_v3.7.rar) from here and shut down the MarsBoard then connect the MarsBoard to the computer and let the board go to recovery mode. When the driver has finish installing then shut down MarsBoard and connect the MarsBoard to your computer and let the board go to recovery mode, then your computer will detect the board and you will see it within device manager. Then click вЂњInstall DriverвЂќ, and depending on your version of Windows the Security below may show up twice during installation.

#Fuzhou rockchip driver install

If you've previously tried to install the Rockchip USB drivers for any Rockchip devices make sure you click вЂњUninstall DriverвЂќ first. Then double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility. ThereвЂ™s no need to connect your Rockchip device during this procedure just download and extract RKDriverAssistant.zip If you have already installed the USB driver please skip this step.

install using RKDriverAssistant tools - the easy way.

There two ways to install the driver under Windows: Both RKBatchTool and RKDevelopTool rely on the RK USB driver so you will need to install it first as below: To flash the update.img, you need to use the RKBatchTool and to flash the partitions, you will need to use RKDevelopTool. The Windows tool for flashing the image is provided by Rockchip.

a micro USB cable with one side plugged in to the OTG port of MarsBoard and the other side plugged into the USB port on PC.

a PC running Windows (XP 32/64bit, Windows 7 32/64 bit) or Linux (32/64bit).

What you will need to flash the board is: You can always flash the MarsBoard, it never bricks (as the nameВ :)) unless some hardware damage occurs.

3.4 Flash RKBatchTool Firmware File with RkFlashKit.

3.1 Using Linux Upgrade Tool to flash update.img.

2.2.2 Using AndroidTool to falsh image by partition.

2.2.1 Using AndroidTool to flash update.img (Firmware).

2.1.1 Install using RK Driver Assistant tools.